Christmas Opening Times
Friday 22nd last order processing 13:30 CET
Monday 25th December   CLOSED
Tuesday 26th December CLOSED
Wednseday 27th December CLOSED
Thursday 28th December OPEN 9:00 last order processing 13:30 CET
Friday 29th December CLOSED
Monday 1st January CLOSED
For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Simultaneously control 4 computers from a single workstation
Supports Quad View, PiP, PaP and Full Screen Modes
Dual Video Output allows 2 local displays to be connected
Multiple units (up to 8) can be daisy chained to control up to 32 computers
A Remote IP Module (No.32328 sold separately) can be added to create a Remote Console
2 year warranty
The Quad View KVM Switch Pro provides a number of different viewing modes, allowing you to view the connected computers/video sources in a layout which best suits your requirements:
In Quadview, the screen is split into four equal fields. Each field displays the entire screen content of its source video or computer. Keyboard & Mouse operations are switched by selecting (using the front panel buttons, hotkeys or the OSD menu) the corresponding computer‘s quad. Quadview is only available via the primary video output.
PiP (Picture in Picture)
When the Picture in Picture function is activated, on of the video sources is displayed as thumbnails on top of a full-screen image from the primary selected source. This allowsit to be monitored alongside a main feed. The position and size of the thumbnails are all customisable. PiP is only available via the primary video output.
PaP (Picture and Picture)
When the Picture and Picture function is activated, three of the four video sources are displayed as thumbnails down the right side of the display next to primary source. This allows them to be monitored alongside a main feed. The active channel, position and size of the thumbnails are all customisable. PaP is only available via the primary video output.
Full screen mode
In Fullscreen mode, one of the four video sources is shown full screen and at maximum resolution. Keyboard & Mouse operation automatically switches to the corresponding computer when channels are switched. Full screen mode is available on primary, secondary video outputs.
In addition to its video capabilities the Quad View Pro features a USB hub and support for analogue audio for each input. These ports can be automatically switched along with video input, or if required switched independently.
1 x Quad View KVM Switch Pro
1 x IEC Power Adapter 100…240VAC / 12V 5.0A
1 x IEC mains cable
1 x LINDY Manual (QIG)
1 x RJ45 to DB9 female (RS232) serial cable
4 x DVI-D Cable 2m long
4 x USB A/B m/m cable 1.80m
4 x Audio Stereo Cable (Jack 3,5mm m/m) 1,80m
1 x 19” Rack Mount Kit (brackets & small screws)
Operation / Storage temperature 0…40°C / -20…60°C
Relative humidity: 0…90%, non-condensing – for indoor use only