Unique solution for connecting a serial equipped PC or Mac to any RS-232 serial equipment over distances of up to 2000m using low cost CAT 5e/6 network cable
Hardware solution, no software required
Ideal for use with EPOS, process control, lab equipment, digital signage etc.
Aluminium transmitter and receiver modules
2 year warranty
The LINDY RS-232 Serial Extender over CAT5 is a low cost hardware solution. It provides full-duplex remote access and control of RS-232 protocol devices from your serial equipped PC or Mac.
The Extender consists of a local Transmitter and remote Receiver unit connected via CAT5e or higher network cable, providing you with a tremendous amount of flexibility in your installation. Ideal for digital signage, industrial monitoring and control, POS or security applications. It allows you to place RS-232 devices in any location you want and control them remotely from up to 2000 meters (6560 feet) away while you can also utilise existing wallports and cabling to connect the device without the need for long length RS-232 cables.
Extender with Transmitter and Receiver
Multi Country PSU 5V DC ~1A with DC connector 5.5mm/2.1mm
LINDY now offers the latest in KVM switching technology with the ability to control up to 4 PCs (with multiple monitor support for up to 4 monitors) from a single location.
PCs with multiple monitors are becoming increasingly popular as they allow much more information to be displayed simultaneously. This greatly improves the users operating environment and efficiency as software/information can be split over several screens eliminating the need to flick between different windows. With the Multiscreen switches you are no longer limited to PCs with single video output. Many of the advanced features found in other high end switches are incorporated into this design.
2 or more Multiscreens may be syncronously switched by linking their control ports
Switch 2, 4, 8, 12 or 16 monitors together by syncronising Multiscreens
Continuous keyboard and mouse emulation on all ports ensures problem free computer bootup
Interface powered operation - draws its power from the connected computers for maximum convenience
Intelligent switching feature enables users to switch between all ports or just the active ports
Supports high bandwidth monitors at resolutions up to 1900 x 1440 with excellent video transfer characteristic - high bandwidth and low distortion
Mixed AT & PS/2 keyboards and PS/2 & RS-232 mice supported as standard
Flash upgradeable - firmware can be upgraded by connecting the switch to a computer's serial port and running a download program (requires additional cable)
Can be cascaded to provide a video switching network
Video channels support Display Data Control (DDC1/DDC2) signalling
Supports LINDY mice, Microsoft IntelliMouse, Logitech Firstmouse+, MouseMan+ and other wheel mice
Channel switching by front panel key, keyboard hotkey or 3 button mouse
Automatically restores keyboard and mouse states when channel changed
Can be controlled remotely by an RS-232 serial port
Standard cable connections make installation easy and inexpensive
Optional power adaptor can be used for video only or cascaded applications (Part No. 32290)
Optional remote control for alternative switching method
4 Port KVM Switch with HDMI, USB 2.0 and Audio Support
HDMI, USB 2.0 and 3.5mm Audio In/Out console ports
Supports USB 2.0 speeds of up to 480Mbit/sec
Supports HDMI signals up to 1080p with 3D and DVI up to 1200p - suitable for PCs, consoles and Blu-Ray Players
2 year warranty
This KVM switch allows four HDMI equipped PCs, Games Consoles or Blu-Ray players to be controlled from a single keyboard, mouse and monitor. Simply connect to your computer with appropriate cables (sold separately) and attach a keyboard, mouse and monitor to the switch and you're ready to go. The additional 3.5mm audio ports allow you to connect headphones or speakers and a microphone while further USB peripherals can be attached with the addition of a USB hub.
4 Port KVM Switch
Multi-Country PSU - 5V ~2A with 3.5/1.35mm connector
Plug & Play installation - no special software required
Advanced compatibility - supports all widely used mice
2 year warranty
Please Note: The KVM Switch Pro supports Digital or Analogue video signals, however, it is not possible to use a mixture of Digital and Analogue video signals simultaneously.
This advanced KVM Switch has been designed for use with PCs and Macs. It features DVI single link video ports and a two port USB 2.0 hub for connecting and sharing your peripherals. With full audio support, you can also connect your speakers and microphone.
Unique Switching Options
With its all metal design, the KVM Switch Pro USB 2.0 Audio DVI-I is ideal for home or office use. The built-in 2 port USB 2.0 hub allows you to save money on additional devices by sharing your peripherals between the connected computers. The unique switching arrangement allows the USB hub to be switched independently of the computers. For example, you can print reports for work from one PC while playing games on the other!
Please note: Connection cables are not included. DVI, USB A to B, and 3.5mm jack to jack microphone and speaker cables are required for each connected computer. The maximum supported distance for USB, using standard cables, is 5m. For distances over 5m, use a LINDY USB Active Extension Cable.
1x KVM Switch
2x 19” Rack Mount Brackets with screws
1x Multi-country PSU 9VDC =2A with 5.5/2.1mm DC connector. Wall mount version with adapters for Euro, UK, US and AUS
Extends 2x HDMI, USB, IR, RS-232 and Audio signals over 2x CAT6 STP cables up to 150m
Supports HDMI 1.4 1080p60 with HDCP as well as DVI-D up to 1920x1200, RS-232 Full Duplex, IR signals and Stereo Audio
Features copy functions for Monitor EDID as well as Keyboard and Mouse models
Plug and Play – no software to install
2 year warranty
This KVM Extender allows you to control your PC using a keyboard, mouse and monitor with a maximum resolution of Full HD 1080p or 1920x1200 at distances of up to 150m /450 feet using two CAT6 cables (not included) and without installing any software. It supports HDMI signals, including, 1080p24 Blu-ray, (3D not supported) audio and HDCP. Analogue stereo audio, IR and RS-232 signals are also supported.
The Dual Head CAT6 HDMI KVM Extender consists of a transmitter unit which is installed near the computer and a receiver unit installed near the user console. The Receiver unit connects to a USB keyboard and mouse, two HDMI monitors and offers an analogue stereo audio port via 3.5mm connector. The Transmitter unit offers the same connections to the computer.