This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either on a Cat.5 KVM switch MC5/-IP as a user station or as an independent KVM extender with a matching Cat.5 KVM module. The KVM switches MC5 and MC5-IP allow you to spatially separate admin workstations via Cat. 5 cables. This Cat.5 KVM module is already integrated in the KVM switch.
This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either at the Cat.5 KVM switch MC5/-IP as a user station or as a stand-alone KVM extender with matching Cat.5 KVM module. The KVM switches MC5 and MC5-IP allow you to spatially separate admin workstations via Cat.5 cables. This Cat.5 KVM module is already integrated in the KVM switch.
Allows console operation at extended distances of up to 200m using CAT5/5e/6 cable
Local workstation may be connected using a suitable CAM, please click here
Connects to your USB keyboard and mouse and VGA monitor
Supports display resolutions of up to 1600 x 1200 @ 75m, 1024x768 @ 200m
Power supply included
Allows your USB keyboard, mouse and monitor to be located up to 200m away from your computer using low cost CAT5/5e cable
Provides a convenient and secure method of remotely locating workstations and fileservers without compromising control and convenience
Installs in minutes - no special software required
Important: This product is solely for use with the MC5, MC5-IP ans SC5 KVM Switch range. It is not a standalone KVM Extender solution. The picture above shows front and rear views of a single unit. See our range of .
This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either on a Cat.5 KVM switch MC5/-IP as a user station or as an independent KVM extender with a matching Cat.5 KVM computer module. A KVM switch is integrated in the user station to alternately access two Cat. 5 outputs. For example, these two outputs can be used to access a KVM switch MC5 up to 300m away, on the other port a local or remote terminal can be accessed (also connected via a Cat. 5 cable and Cat 5 module) or to an additional KVM switch MC5.
Optical Transmitter with high speed transfer using multiple active wavelengths for pristine, uncompressed image transmission
Single multimode connection
This KVM Extender transmits DVI-D (Single Link) signals up to 1920 x 1200 without loss or compression up to 1000m. USB Keyboard and Mouse signals (standard functions only) can also be extended, giving you control over your computer from up to 1KM away.
In addition, using the optional IR Extender Kit it is also possible to extend IR signals. The KVM Extender extends your computers signals without fear of RF interference.
Unique solution for connecting a serial equipped PC or Mac to any RS-232 serial equipment over distances of up to 2000m using low cost CAT 5e/6 network cable
Hardware solution, no software required
Ideal for use with EPOS, process control, lab equipment, digital signage etc.
Aluminium transmitter and receiver modules
2 year warranty
The LINDY RS-232 Serial Extender over CAT5 is a low cost hardware solution. It provides full-duplex remote access and control of RS-232 protocol devices from your serial equipped PC or Mac.
The Extender consists of a local Transmitter and remote Receiver unit connected via CAT5e or higher network cable, providing you with a tremendous amount of flexibility in your installation. Ideal for digital signage, industrial monitoring and control, POS or security applications. It allows you to place RS-232 devices in any location you want and control them remotely from up to 2000 meters (6560 feet) away while you can also utilise existing wallports and cabling to connect the device without the need for long length RS-232 cables.
Extender with Transmitter and Receiver
Multi Country PSU 5V DC ~1A with DC connector 5.5mm/2.1mm
Simultaneously control 4 computers from a single workstation
Supports Quad View, PiP, PaP and Full Screen Modes
Dual Video Output allows 2 local displays to be connected
Multiple units (up to 8) can be daisy chained to control up to 32 computers
A Remote IP Module (No.32328 sold separately) can be added to create a Remote Console
2 year warranty
The Quad View KVM Switch Pro provides a number of different viewing modes, allowing you to view the connected computers/video sources in a layout which best suits your requirements:
In Quadview, the screen is split into four equal fields. Each field displays the entire screen content of its source video or computer. Keyboard & Mouse operations are switched by selecting (using the front panel buttons, hotkeys or the OSD menu) the corresponding computer‘s quad. Quadview is only available via the primary video output.
PiP (Picture in Picture)
When the Picture in Picture function is activated, on of the video sources is displayed as thumbnails on top of a full-screen image from the primary selected source. This allowsit to be monitored alongside a main feed. The position and size of the thumbnails are all customisable. PiP is only available via the primary video output.
PaP (Picture and Picture)
When the Picture and Picture function is activated, three of the four video sources are displayed as thumbnails down the right side of the display next to primary source. This allows them to be monitored alongside a main feed. The active channel, position and size of the thumbnails are all customisable. PaP is only available via the primary video output.
Full screen mode
In Fullscreen mode, one of the four video sources is shown full screen and at maximum resolution. Keyboard & Mouse operation automatically switches to the corresponding computer when channels are switched. Full screen mode is available on primary, secondary video outputs.
In addition to its video capabilities the Quad View Pro features a USB hub and support for analogue audio for each input. These ports can be automatically switched along with video input, or if required switched independently.