For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Control your servers over the internet or via your LAN
Provides administrator access to your KVM switches and servers over the LAN, internet or telephone line
Integrates into almost any existing KVM configuration that uses standard PS/2 or USB keyboard/mouse, and VGA monitor signals
Provides connection for a local KVM console (USB & PS/2)
PS/2 & VGA Combo KVM cable and rackmount bracket included
IP V.6 protocol not supported
2 Year warranty
The KVM IP Access Switch Classic USB allows administrators to monitor and access their computers from remote locations.
It connects to the internet, an intranet, LAN or Wan using standard CAT5 or higher cable, or to an analogue telephone line (requires modem), and then uses a supplied KVM cable to connect to a local KVM switch or server.
The IP Access Switch Classics remote access and control software runs on its embedded processor - so theres no interference with server operation, or impact on network performance.
KVM over IP remote access to the KVM over IP Extender can be accessed in two ways:
1. Via VNC using a VNC client, please see the Web for VNC clients
2. Via Web browser with Java support. Please note that Chrome and Firefox no longer support the required NPAPI for Java. As of March 2017 the only widely used browser to support NPAPI for Java is Internet Explorer, should this support also be removed then the only available option for remote access will be to use a VNC client.
IP Access Switch Classic
1m 3-in-1 PS/2 & VGA KVM cable
1.8m RS-232 serial cable (for connecting to a terminal)
1m USB A to Mini-B cable
External multi country power supply: 100-240VAC-0.3A/DC 12V-1A regulated with standard 2.5/5.5mm connector
Multi country adapters for use in US, EURO, UK, AUS/China
Provides access to your KVM switches and servers over the LAN, internet or telephone line (requires modem)
Integrates into almost any existing KVM configuration that uses standard PS/2 or USB keyboards and mice, and VGA monitor signals
Provides connection for a local KVM console (USB or PS/2 & VGA)
Supports BIOS level access
Remote storage support - USB connection allows virtual storage devices to be set up on the host and accessed from the client
Advanced security features with up to 155 users and 155 administrator accounts
Supports up to 15 simultaneous remote users
High-resolution video support: 1280 x 1024, 1600x1200 via virtual desktop mode, 1600 x 1200 for the local console
Port selection via the OSD of the connected KVM switches
Automatic fast mouse synchronisation
16 definable hotkey shortcuts
Modem and 10/100Base-T connections for dial-up and IP access