For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Simple plug and play installation, no drivers or software required
Extends HDMI and DVI-D signals via 1000Base-T Gigabit Ethernet or a single Cat 6 cable (up to 100m)
Supports Full HD 1080p via HDMI and DVI-D Single Link up to 1920 x 1080
Designed for smooth video playback as well as high resolution computer graphics
Extends RS232, IR and USB* signals
IR Frequency range 35-45kHz
Can be used to Extend (1 x transmitter to 1 x receiver) or Broadcast (1 x transmitter to multiple receivers)
2 Year Warranty
The HDMI over Gigabit Ethernet Extender System is capable of broadcasting 1080p Full HD over a standard gigabit network. It can operate as a standard extender in a single transmitter to single receiver configuration or can be used as a distribution system with a single transmitter to multiple receivers. In addition to extending Full HD 1080p HDMI signals the extender system can also be used to extend USB*, RS232 and IR remote control signals, meaning it can even be used as a KVM extender for remote control of a computer.
*Please Note: Only asynchronous USB devices such as keyboard and mouse are supported, mass storage, pendrives, printers and webcams cannot be supported
HDMI over Gigabit Ethernet Extender, Receiver
5V DC ≥2.5A Multi-Country Power Supply
Supports HDMI up to FullHD 1080p, HDCP and DVI-D up to 1920x1080 (1920x1200 is not supported)
Uses a non-visually perceptible dynamic compression for network transmission over Gigabit Ethernet
Supports network switches and other active components such as Gigabit Ethernet Fiber Optic Transceivers for longer distances
May be used with Fast Ethernet 100Base-T, which will require a higher dynamic compression level
Multiple transmitters may be used on the same network, however due to bandwidth restrictions some fluidity of video may be lost
Dynamic adaptation and development of the network connection and the video link
Status LEDs to verify the connection
RS232 supports parallel transmission, connection via D-sub 9-pin plug sockets
Supports parallel transmission of IR remote control signals, IR sensor on the receiver
Supports parallel transmission of asynchronous USB signals. Only asynchronous USB devices such as keyboard and mouse are supported, mass storage, pendrives, printers and webcams cannot be supported.
The audio ports on the receiver (38067) are connected to the transmitter (38066) which connects to a PC as a USB audio device with stereo out and mic in. Digital audio via HDMI is supported but not converted to the analog 3.5mm stereo out ports on the receiver but provided via HDMI only.