Christmas Opening Times
Friday 22nd last order processing 13:30 CET
Monday 25th December   CLOSED
Tuesday 26th December CLOSED
Wednseday 27th December CLOSED
Thursday 28th December OPEN 9:00 last order processing 13:30 CET
Friday 29th December CLOSED
Monday 1st January CLOSED
For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Continuously emulates EDID information for HDMI connections
Supports 4K monitors up to 3840 * 2160 @ 30Hz
Uses cloned data or, when this is not available, the stored preset screen resolutions (see Technical Information)
Monitors with other resolutions / timings are supported after the monitor EDID data have been copied into the emulator adapter using the Programmer No.32100 (as supplied after July 2015, including the blue HDMI programming adapter).
Powered via your computer's graphics card
2 Year warranty
These emulators are designed for systems that require EDID/DDC signals to be continuously provided without interruption. Some computer systems, KVM switches and digital video signage systems may interrupt the data, or may not be able to pass this information directly back to the video card's display port. This simple solution will provide preset/default EDID/DDC information, or when used with the LINDY EDID/DDC Emulator can provide cloned EDID/DDC information to your graphics card.
Video connectors: HDMI Male to HDMI Female
Dimensions: 38 x 40 x 15mm (TBC)
EDID Preset Standard data set (September 2016) - Rsolutions not listed may only be supported after the EDID data of the monitor have been cloned using the EDID/DDC Emulator Programmer No.32100 (as supplied after July 2015 with the blue HDMI programming adapter):
Default color space...... Non-sRGB
Display gamma............ 2,20
Red chromaticity......... Rx 0,680 - Ry 0,310
Green chromaticity....... Gx 0,210 - Gy 0,700
Blue chromaticity........ Bx 0,147 - By 0,054
White point (default).... Wx 0,313 - Wy 0,329
Additional descriptors... None
Horizontal scan range.... 31-140kHz
Vertical scan range...... 29-75Hz
Video bandwidth.......... 300MHz
CVT standard............. Not supported
GTF standard............. Not supported
Additional descriptors... None
Preferred timing......... Yes
Native/preferred timing.. 3840x2160p at 30Hz (16:9)
CE video identifiers (VICs) - timing/formats supported
1920 x 1080p at 60Hz - HDTV (16:9, 1:1) [Native]
1920 x 1080i at 60Hz - HDTV (16:9, 1:1)
1280 x 720p at 60Hz - HDTV (16:9, 1:1)
720 x 480p at 60Hz - EDTV (16:9, 32:27)
720 x 480p at 60Hz - EDTV (4:3, 8:9)
720 x 480i at 60Hz - Doublescan (16:9, 32:27)
720 x 576i at 50Hz - Doublescan (16:9, 64:45)
640 x 480p at 60Hz - Default (4:3, 1:1)
720 x 480i at 60Hz - Doublescan (4:3, 8:9)
720 x 576p at 50Hz - EDTV (4:3, 16:15)
720 x 576p at 50Hz - EDTV (16:9, 64:45)
720 x 576i at 50Hz - Doublescan (4:3, 16:15)
1280 x 720p at 50Hz - HDTV (16:9, 1:1)
1920 x 1080i at 50Hz - HDTV (16:9, 1:1)
1920 x 1080p at 50Hz - HDTV (16:9, 1:1)
1920 x 1080p at 24Hz - HDTV (16:9, 1:1)
Other supported resolutions at 30Hz:
Rsolutions not listed may only be supported after the EDID data of the monitor have been cloned using the EDID/DDC Emulator Programmer No.32100 (as supplied after July 2015 with the blue HDMI programming adapter).