For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
HDMI 1.3 Compliant, HDCP compatible, 3D signals are not supported
Transmission range up to 150m for each segment over Cat.5e cable
Integrated HDMI Splitter on the Receiver/Repeater Unit to connect 1 HDMI Display and 2 cascaded Receivers/Repeaters.
Up to 31 levels (max 100 displays connected) of Receiver/Repeater can be used
Plug & Play Installation: no configuration required
No EDID data pass though function (please refer to the table in the section “EDID Presets” at the end of the manual to see the supported video modes)
Supported Audio formats: LPCM 2-channel, 16/20/24 bit depths at 32/44/48 kHz
This extender allows you to transmit an HDMI video signal to a series of remote displays/projectors up to a distance of up to 150m between each Transmitter (No. 38140) and Receiver/Repeater (no.38141) using high quality Cat.5e/6 solid core cables.
Each HDMI Receiver/Repeater (no.38141) unit features a HDMI output port for local connection of a display/projector and two RJ45 output ports allowing further Receiver/Repeaters to be cascaded. This allows a single Transmitter to be used with up to 100 displays/projectors by cascading through multiple layers.
Please Note: Network components are not required and not allowed in this daisy chain system!