This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either on a Cat.5 KVM switch MC5/-IP as a user station or as an independent KVM extender with a matching Cat.5 KVM module. The KVM switches MC5 and MC5-IP allow you to spatially separate admin workstations via Cat. 5 cables. This Cat.5 KVM module is already integrated in the KVM switch.
This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either at the Cat.5 KVM switch MC5/-IP as a user station or as a stand-alone KVM extender with matching Cat.5 KVM module. The KVM switches MC5 and MC5-IP allow you to spatially separate admin workstations via Cat.5 cables. This Cat.5 KVM module is already integrated in the KVM switch.
Allows console operation at extended distances of up to 200m using CAT5/5e/6 cable
Local workstation may be connected using a suitable CAM, please click here
Connects to your USB keyboard and mouse and VGA monitor
Supports display resolutions of up to 1600 x 1200 @ 75m, 1024x768 @ 200m
Power supply included
Allows your USB keyboard, mouse and monitor to be located up to 200m away from your computer using low cost CAT5/5e cable
Provides a convenient and secure method of remotely locating workstations and fileservers without compromising control and convenience
Installs in minutes - no special software required
Important: This product is solely for use with the MC5, MC5-IP ans SC5 KVM Switch range. It is not a standalone KVM Extender solution. The picture above shows front and rear views of a single unit. See our range of .
This user station sends KVM- and audio signals via Cat 5 RJ45 cables. It is used either on a Cat.5 KVM switch MC5/-IP as a user station or as an independent KVM extender with a matching Cat.5 KVM computer module. A KVM switch is integrated in the user station to alternately access two Cat. 5 outputs. For example, these two outputs can be used to access a KVM switch MC5 up to 300m away, on the other port a local or remote terminal can be accessed (also connected via a Cat. 5 cable and Cat 5 module) or to an additional KVM switch MC5.
Supports two DVI-D link at resolutions up to 1920 x 1200 at 60Hz
6Gbps total bandwidth
Send KVM signals up to 1000m over 50/125μm SC Duplex multi-mode Fibre Optic cable
Easily installed with no additional software installation - OS independent
Class 1 Laser product with automatic disable if the fibre cable is broken or removed
2 year warranty
Please note: Does not support HDCP over DVI & HDCP-encrypted HDMI signals
This KVM Extender transmits two DVI-D signal over distances up to 1000m in HD resolutions up to 1920 x 1200 (WUXGA) with no loss of image quality. Its high speed optical transmitter uses multiple active wavelengths for uncompressed data transfer between transmitter and receiver units.
Utilising 1:1 duplex multi-mode fibre optic cable allows you to make a substantial cost saving compared to other solutions that require multi-core fibre cables.
It also means transmission problems caused by using unequal simplex cables can be easily avoided from the outset, reducing installation time and costs.
Support for infrared control signals also means you gain the additional bonus of being able to control additional devices from a single hardware installation.
1 x 2m LINDY USB Type A Male to Mini-B Male cable
2 x 2m LINDY DVI-D Male to Male cables
2 x Multi-Country Power Adapters 100 - 240V Input 5VDC 3A Output with 5.5/2.5mm connector (Euro, US, UK & Australian plugs)