4 pieces of EVA foam with single sided self-adhesive
Customizable - cut to size as required
Ideal for installing 7mm or 7.5mm HDDs into standard 2.5” hard drive enclosures designed for 9.5mm high HDD
These Self-adhesive Foam Pads fill the space between a drive and the drive enclosure, cutting down on the possible range of movement of a drive and therefore reducing the risk of damage to the drives SATA connection.
SSD/HDDs vary in depth - either 7 or 7.5mm - leaving a relatively large amount of space for them to move in a 2.5" drive enclosure or housing.
Overtime, everyday knocks or movement can fatigue an unsecured drive's connection to the rest of the PC, causing the connection to fail and - in a worse case scenario - damage the SATA connection pins making the drive virtually inoperable.
By filling the gap between the drive and the housing with a foam pad you can cushion the drive and help reduce the risk of damage to it or its connections.
Additional benefits of installing these pads include some reduction in vibration transmissions from HDDs, helping cut down on general running noise. Dimensions (each piece) 10x9.5x2.5mm (WxDxH).
For installation of 3.5" IDE or SATA hard drives up to a storage capacity of 4TB
Compact, fanless aluminium housing
Includes Power On/Off Switch for power saving
Supports Advanced Format Technology
Supports all modern Operating Systems
2 year warranty
External powered aluminium HDD enclosure for 3.5 inch IDE or SATA hard disk drives. The enclosure provides a simple way to add up to 4TB of external storage to your computer or make use of older hard drives.
Important Information: Hard drive not included.
3.5” IDE & SATA HDD Enclosure
USB 2.0 Type A to USB Type B cable approx. 0.9m
2x internal data connection cables - 1x SATA, 1x IDE pATA
2x internal power cables - 1x SATA power, 1x IDE 4pin Molex power
Compact metal housing with integrated power supply
Advanced Format 3TB support for each drive
Map individual volumes via a single cable
Built-in low-noise 8cm ventilation Fan
IEC power input and ON/OFF switch
Plug & Play Installation
Compatible with XP/Vista/7/8, OSX 10.8 & higher
2 year warranty
Connect up to four SATA hard drives to your computer using a single cable. Whether you choose to use the USB 3.0 or eSATA interface your disks will be available to you as individual drives/volumes, offering you very fast access to your data.
Please Note: When using the eSATA connection the eSATA controller on your motherboard must support eSATA II / 300 / 3Gbps or higher with eSATA Port Multiplier feature.