Extends DVI-D video signals up to 50m using low cost CAT5e/5 Cable (not included)
Supports resolutions from 800x600 up to 1920x1200 including 1080p
Power consumption: 1.6W (5V 320mA)
HDCP not suported
2 year warranty
Please note: picture is for illustration purposes only. Network cable is not included.
With this Extender you can use up to 70m of high quality inexpensive Cat.5e/6 cable to connect a DVI source to a DVI display device.
The slim RJ45 connectors and Cat.6 cable (not included) allow greater flexibility not possible with larger DVI connectors and cables.
Normal operation will not require external power; however the Transmitter unit allows external power to be attached in cases where the graphics card does not provide sufficient power, either using a USB Micro-B Cable or an external power supply (5V 320mA) connected to the supplied USB to DC cable.
The Extender supports the following resolutions/distance combinations
800x600 up to 70m
1024x768 up to 65m
1280x1024 to 1920x1200 up to 50m
RJ-45 patch cable: 1 x CAT5e/6 UTP Cable
Transmitter and Receiver Units
USB Micro-B Male to DC (5.5/2.5mm Outer/Inner) Female Adapter Cable, Overall length 12cm
For use with high-resolution monitors up to 2560x1600
Supports DVI-D Dual Link resolutions up to 2560 x 1600
For Single Link resolutions up to 1920 x 1200 or 1080p, please use our DVI Single Link Extender No. 32669
With almost all graphics cards and when using LINDY Super Long Distance cables (SLD), supports cable lengths up to 10m at input + 10m at output
Depending on the quality of the graphics chipset and the stability of the output signal, cable lengths up to 25 m are also supported on both input and output. The following section has some examples. These results may vary as a result of series dispersion or with different graphic card manufacturers.