Christmas Opening Times
Friday 22nd last order processing 13:30 CET
Monday 25th December   CLOSED
Tuesday 26th December CLOSED
Wednseday 27th December CLOSED
Thursday 28th December OPEN 9:00 last order processing 13:30 CET
Friday 29th December CLOSED
Monday 1st January CLOSED
For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Extends HDMI 1.4 & IR Signals up to 50m* using a single Cat.6 Cable
Supports resolutions up to Full HD 1080p, including 3D
Features a loop-through HDMI output on the Transmitter for local monitoring
Supports power over Cat.6, only a single power supply is required
2 Year Warranty
The HDMI & IR Cat.6 Extender is a simple to use plug and play solution which lets you extend an HDMI AV signal up to 50m using a single low cost Cat.6 U/UTP cable (not included). For added convenience IR signals (20-60 kHz) can also be extended using the supplied IR Receiver and Emitter cables. Supporting resolutions up to Full HD 1080p, including 1080p 3D, the Extender is designed for use in AV and digital signage applications in a variety of settings such as home, education, business, retail and healthcare.
The Extender features an HDMI loop-through output on the Transmitter with simultaneous viewing so that a local display can be connected for monitoring or to create an additional viewing zone. To ensure the maximum compatibility when two displays are connected the EDID data, which determines the supported video and audio formats, can be used from either a local monitor connected to the Transmitter or the remote monitor connected to the Receiver.
Power over Cat.6 (PoC) functionality enables the Extender to operate from a single power supply connected to the Transmitter, allowing the Receiver to be located where there is limited access to mains power sockets making it ideal for retro fit installations. In addition to PoC functionality the Extenders slim design makes it easier to install in limited spaces behind modern flat screen displays.
* Please Note: The quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 solid core cable. Using a different cable type, or introducing wall plates, couplers or patch panels will result in a reduction of possible distances.
HDMI & IR Cat.6 Extender with local HDMI output
5V DC 1A Multi-Country PSU (with Euro, US, UK & AUS/China AC connectors), DC round plug: 5.5mm/2.1mm
IR Emitter Cable
IR Receiver Cable
Extends HDMI 1.4 (including HDCP) & IR signals via Cat5e/Cat6 UTP Cable
Connection is via cat.5e/6/7 cable, up to 50m (CAT6 solid core recommended)
Local HDMI output allows local & remote displays to be used simultaneously
Supports resolutions up to Full HD 1080p 60Hz (4:4:4 at 8bpc, 4:2:2 at 12bpc)
Supports Full HD 1080p24 3D according to HDMI 1.4
Audio Formats: LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD
PoC (Power over CAT6) feature requires only a 5V 1A PSU to be attached
Supports 20 – 60kHz IR Frequencies
Maximum HDMI cable length: 3m in/out
EDID can be selected from either the remote or local display
Adjustable EQ to match CAT5e/6 cable length
Transmitter ports: HDMI Type A In, 1x CATX Out, 3.5mm IR Out & DC Socket
Receiver ports: HDMI Type A Out, 1x CATX In, 3.5mm IR In & DC Socket