For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Extends DVI-D and USB signals using a single CAT6 cable
DVI-D Single Link compatible, supports resolutions up to 1920x1200p
Supports USB 1.1 HID signals for keyboards and mice and most USB 2.0 devices
Requires a Receiver unit, available with different feature sets (sold separately)
2 year warranty
This KVM extender delivers DVI-D single link signals with resolutions up to 1920x1200 without any loss in quality over distances up to 130m using a standard CAT6 cable, or up to 230m via a dedicated gigabit ethernet switch.
In addition, it supports the transmission of USB HID signals for mice, keyboards and USB touchscreens.
For added convenience the Transmitter features a local video output port so that a monitor can be connected next to the host computer.
In addition to its standard functions the KVM Extender may also have the following features enabled via chargeable unlock codes:
Mass Storage support
KVM matrix switching via a gigabit network switch
The other models within this KVM extension system are:
39210 130m CAT6 KVM Extender DVI-D & USB (basic model with extended options)
39240 500m LC Fibre Optic KVM Extender DVI-D & USB (basic model with extended options)
39201 130m CAT6 KVM Extender DVI-D & USB (basic model)
39202 130m CAT6 KVM Extender DVI-D & USB (basic model with mass storage)
39211 130m CAT6 KVM Extender DVI-D & USB (basic model with extended options)
39212 130m CAT6 KVM Extender DVI-D & USB (basic model with mass storage and extended options)
39213 130m CAT6 KVM Extender DVI-D & USB (basic model with audio support and extended options)
39214 130m CAT6 KVM Extender DVI-D & USB (basic model with mass storage, audio and extended options)
39241 500m LC Fibre Optic KVM Extender DVI-D & USB (basic model with extended options)
130m CAT6 KVM Extender DVI-D & USB - Transmitter
12V 1.25A Multi-Country Power Supply (UK, EUR, US & AUS) with 5.5/2.1mm DC Jack
USB 2.0 A/B Cable, 2m
HDMI/DVI-D Cable, 2m
HDMI Type A Female x 2 (1 x Input, 1 x Local Output)
USB 2.0 Type B Female
DC Socket (5.5/2.1mm)
DVI-D up to 1920x1200p 60Hz RGB
HDMI up to 1920x1080p 60Hz RGB only!
HDCP: Not supported
HDMI Deep Colour: Not supported
Connection via CAT6 solid core cable minimum*
Operating conditions: For indoor use only
Operating temperature range 0°C to 50°C
Storage temperature range -20°C to 70°C
Dimensions approx. 10 x 10.5 x 4.4 cm, weight approx. 0.3kg
Power supply: regulated switching power supply 100- 240VAC / 12VDC 1.25A Multi-Country Power Supply (UK, EUR, US & AUS) with 5.5/2.1mm DC Jack
Please Note: Connection via high-quality Cat.6 cable with automatic adaptation of the extender to the characteristics of the cable connection. The higher the cable connection is, the further and better quality the transmission that takes place. Ideally use a direct connection with Solid Core Cat.6 cable (or higher) without additional connectors.