For destinations within the European Union (EU), delivery will usually be made within two to five working days of despatch, depending on service and country.
Orders received and accepted before 3.00pm (CET) will be despatched on the same working day, subject to availability.
We offer fixed rate delivery costs to most mainland EU countries. The delivery costs to each country are shown in the table below.
If the country you require is not in the list or if you are a Business (Trade) account holder, please contact us, and we will calculate the delivery cost for you.
Integrated 3 port 10/100 ethernet hubs in both the transmitter and receiver units
Simple plug and play installation
2 Year Warranty
The LINDY HDMI C6 Extender supports uncompressed Full HD 1080p and UHD 4K signal transmissions for high resolution computer graphics and fluent video transmission, at distances up to 100m using high quality Cat.6/Cat.7 RJ45 cable using HDBaseT technology.
In addition to extending HDMI signals the extender also supports the extension of RS232 and Infrared signals and also operates as a 3 port 10/100 Ethernet Switch.
For added convenience and flexibility the Receiver unit is powered from the Transmitter over the Cat.6/7 cable using the HDBaseT PoE feature.
It supports DisplayPort 1.1 up to 4K30 / 3840x2160 @ 30Hz using the LINDY adapters 41728 (at the source) and 38146 (at the monitor)
Extends uncompressed HDMI or DVI-D signals up to 100m via its HDBaseT connection
Supports HDTV resolutions up to 1080p with 24/36/48 bit colour depth
Supports 3D, including 1080p 3D
4K UHD 3840x2160p24/30Hz signals can be extended up to 60m
Supports LPCM, DTS Digital, DTS HD, Dolby Digital & Dolby True HD audio
Transmitter and receiver each with 3 RJ45 ports
All connections are connected to the common HDBaseT port
10/100Base-T support, IEEE 802.1Q, 802.3, 802.3u and 802.3x support
The HDBaseT RJ45 ports on this extender must never be connected to a LAN as this will cause the extender to fail
IR remote support
Typically range up to 15m
IR Emmiter and IR Receiver cables included
3.5 mm jack for IR Receiver on the transmitter
3.5 mm jack for IR Emmiter on the receiver
Frequency range 30-50kHz, transparent, protocol-independent
Link and Status LEDs on the front panel
Dimensions approx. 13 x 13 x 3cm each for transmitter/receiver
Weight approx. 0.450 kg each for transmitter/receiver
External power supply on the transmitter: 100 - 240VAC / 24VDC 1.25A, with adapters for Euro, U.S., UK and Australian outlets
Operating temperature range 0-45°C, for indoor use only
Please Note: For larger distances up to 300m, we recommend our HDMI Fibre Optic Extender